1U 400W OEM Fitted Redundant Module.

PCICASE Model No: CPR-4011-4M1
Manufacturer Model No: CPR-4011-4M1
Build To Order
Key Features
  • 80 PLUS Gold
  • Support PMBus1.2
  • Internal ORing
  • N+1 Redundant
  • High Power Density 15 W/in3
  • Highest efficiency 93%@230Vac
  • Active Power Factor Correction
  • Application for Embedded server , Storage , Networking , IPC

Total Max Power:400 W
Input Voltage:90 V to 264 V
Outputs:Single-output
Dimension (D x W x H): 220 x 54.5 x 40 mm

GENERAL SPECIFICATIONS
Hold-up time 12ms @ 100% Load
Efficiency at least 92% @ 50% Load
MTBF 50,000 hours at 100% load and 50 degree C

ENVIRONMENTAL SPECIFICATIONS
Temperature 0 to 50 degree C Operating
Altitude 10,000 feet Operating
Relative humidity 20% to 90% RH Operating

INPUT SPECIFICATIONS
Input voltage 90 - 264 V
Input frequency 47 - 63 Hz
Input current 7.0 - 2.5 A

OUTPUT SPECIFICATIONS
Voltage Regulation Max Load Ripple & Noise
+12V ± 5% 33A 120mV
+5Vsb ± 5% 4A 50mV
Note:
1. The total output power can not exceed 400W continuously for 90 to 264VAC input
2. During load changes from minimum to maximum or maximum to minimum the unit must not shut down
3. Under no load or minimum load condition, the power supply must be able to power on
  or off successfully
4.Please call for PDB(Power Distribution Board) price & Model for your application, refer to attached Building Block instruction.

Power Supply Datasheet   Datasheet
 

CPR-4011-4M1 Datasheet.pdf

 

Power Supply Technical Drawing  Drawing
 

 CPR-4011-4M1 Drawing.pdf

 

Power Supply Test Report Test Report
 

 CPR-4011-4M1 Test Report.pdf


CompuWare Building Blocks           Building Block Application
 

 Compuware Building Block Application.pdf

 

Get in touch

Give us a call to find out more about our products

Inside the UK
0870 300 3388

Outside the UK
+44 1908 272770

Or send us an email
pcisales@pcicase.co.uk