2U 24 x 2.5" NVMe Hot-Swap PCIe SSD + 2 x 2.5" Internal Per Node High Availability Barebone Storage Chassis with 2 x Phoenix Motherboards

PCICASE Model No: HA202-PH
Manufacturer Model No: HA202-PH
Key Features
  • 24 hot swap bays for dual-port NVMe SSDs (U.2)
  • High-availability storage server optimized for mission-critical, enterprise-level storage applications
  • Fully redundant, fault-tolerant system supporting hot swappable controller nodes and storage drives
  • Two compute nodes, Active-Active configuration, each supporting two Intel® Xeon® Processors E5-2600 v3 and next generation Product Family
  • 2 PCIe x16 slots per node provide direct links to CPU
  • Reserves 10 GbE, PCIe NTB or SAS link between nodes for communication and fail-over
  • Includes IPMI 2.0 & iKVM
 features and benefits

HA202-PH is a 2U 24-Bay NVMe storage server solution that provides high-availability with accelerated performance. The HA202-PH supports 24 dual-port U.2 NVMe PCIe SSDs. It comes with two AIC Phoenix Server Boards (one board per node), each supporting dual Intel® Xeon® Processors E5-2600 v3 and v4 product family. Both nodes process I/O, and provide simultaneous and balanced access to the logical devices, which significantly increases overall cluster performance. When failover occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. By eliminating SPOFs (single points of failure) and designed for redundancy and end-to-end data protection, the HA202-PH provides protection from storage system down time and loss of revenue when access to data resources and critical business applications are uninterruptible. Its support of NVMe SSDs allows for super-fast data access, and is optimized for mission-critical, enterprise-level storage applications.

Dimensions (W x D x H) (with chassis ears)
mm : 482.6 x 815 x 88
inches : 19 x 32 x 3.5

Motherboard (per node)
AIC Server Board Phoenix

Processor (per node)
Processor Support: Two Intel® Xeon® Processors E5-2600 v3 and next generation Product Family
QPI Speeds 9.6 GT/s, 8 GT/s, 7.2 GT/s
Socket Type Socket R3 (FCLGA2011-3)

Chipset Support (per node)
Intel® C612 Chipset

System Memory (per node)
12 DIMM slots across 8 memory channels (4 memory channels per CPU; 2 channels with 2DPC and 2 channels with 1DPC)
- 384GB DDR4 2133/1866 RDIMM DRx4
- 96GB DDR4 2133/1866 RDIMM SRx4
- 768GB DDR4 2133/1866 LRDIMM QRx4
- 1536GB DDR4 2133/1866 LRDIMM 3DS 8Rx4

Front Panel
Power on/off

A : Power (Secondary), Warning
B : Power (Primary), Warning

Drive Bays
External 2.5" hot swap 24, Internal 2.5" 2 (per node)
Backplane 1 x 24-port NVMe backplane with dual loop

Expansion Slots (per node)
PCIe 3.0 2 x16 (direct links to CPU)

Riser Card (per node)
PSG-RC-HA2U-24-101 2 PCIe x16
Expander Board
1 x 24-port (48 lanes PCI Express) NVMe expander board

System BIOS
• Insyde UEFI BIOS
• SPI (Serial Peripheral Interface) FLASH Interface
BIOS Features:
• AC loss recovery
• IPMI 2.0 KCS interface
• Serial console redirection
• BIOS Boot Specification
• BIOS Recovery Mode
• PCIe Hotplug

On-board Devices (per node)
SATA: Built-in SATA RAID controller on Intel® C612 Chipset with software RAID support
6x 7pin SATA connectors
Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
• Baseboard Management Controller
• Intelligent Platform Interface 2.0 (IPMI 2.0)
• iKVM, Media Redirection, IPMI over LAN,
Serial over LAN
• SMASH Support
Network Controllers:
• Intel® 82599ES 10 GbE Controller, dual port, SFP+, PCIe v2.0 (5.0GT/s)
• Intel® Ethernet Controller I210-AT, single port GbE controller, PCIe v2.1, 2.5 GT/s, x1
• Intel® Ethernet Network Connection I217-LM, single port GbE, 1 Gbps
Aspeed AST2400 Advanced PCIe Graphics & Remote Management Processor
• PCIe VGA/2D Controller
• 1920x1200@60Hz 32bpp

Rear I/O (per node)
• 2 x 10 GbE SFP+ 
• 2 x RJ45
• 2 x USB 3.0 Type A 
• 1 x VGA 
• 1 x Serial

Power Supply

AC 1200W 1+1 redundant high-efficiency power supply 80+
• 90-264VAC, 47-63 Hz

System Cooling (per node)
2 x 60x56mm fan modules

System Management
• IPMI 2.0
• KVM over IP
• Media redirection
• Temperature, fan, voltage, PSU sensor monitor
• System temperature
• System ID / System fail indicator
• Remote power on/off/reset
• SEL message alarm through mail
• SNMP support
• Intel NM

Environmental Specifications
• Operating temperature : 0° - 35°C
• Operating altitude condition : 0 ~ 10K feet
• Storage temperature : -20° ~ 60°C
• System relative humidity : 5% - 95% (38°C) non-condensing

Gross Weight (w/ PSU & Rail)
kgs : 41
lbs : 90

(W x D x H)
mm : 590 x 1150 x 330
inches : 23.2 x 45.3 x 13

Standard 28" tool-less slide rail

Datasheet HA202-PH Datasheet

 HA202-PH datasheet.pdf


Motherboard Manual HA202-PH (Front 45 Degrees)

 Phoenix User Manual.pdf


Product Images HA202-PH (Front 45 Degrees)



Product Images                                           HA202-PH (Front)



Product Images HA202-PH (Top)



Product Images HA202-PH (Rear)




Get in touch

Give us a call to find out more about our products

Inside the UK
0870 300 3388

Outside the UK
+44 1908 272770

Or send us an email