
*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS850NP010701
* Firmware REV	        : ZS850NP010701
* GIT repository        : ZS216-NP_v12_2_06_7500_8500
* GIT version           : 3f531173945e884aa6d566fdf8d6b4d86f92cae1
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Samuel Yang
* Approved By           : Jacken Lee
* RELEASE DATE          : 2022/12/09   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Feature] Disable all bmc update bios function.

NOTE:

*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS850NP010601
* Firmware REV	        : ZS850NP010601
* GIT repository        : ZS216-NP_v12_2_06_7500_8500
* GIT version           : 2080fadb82db1ac4055149c6ef387c4f94ef434d
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Samuel Yang
* Approved By           : Jacken Lee
* RELEASE DATE          : 2022/09/27   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Issues] Fix below issues.
        redmine #5025 BMC FW update via Yafuflash Fail.
        redmine #5029 SMBIOS Type1 UUID and BMC GUID doesn't fit the format.

NOTE:

*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS850NP010501
* Firmware REV	        : ZS850NP010501
* GIT repository        : ZS216-NP_v12_2_06_7500_8500
* GIT version           : ace9c02c1642f27168d75f2a35b45f9a0ce974c0
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Samuel Yang
* Approved By           : Jacken Lee
* RELEASE DATE          : 2022/09/15   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Feature] Modify default virtual media instances to 0.

NOTE:
    1. Due to updating default configuration, please do not preserve config while updating firmware.


*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS850NP000501
* Firmware REV	        : ZS850NP000501
* GIT repository        : ZS216-NP_v12_2_06_7500_8500
* GIT version           : b5b787f475b403293416740c495d4dd464c5386d
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Samuel Yang
* Approved By           : Jacken Lee
* RELEASE DATE          : 2022/09/08   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Feature] Modify smart fan table by customer request.
    2. [Feature] Change power policy to always power on.

NOTE:
    1. Due to updating fan table, please do not preserve config while updating firmware.


*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS850NP010401
* Firmware REV	        : ZS850NP010401
* GIT repository        : ZS216-NP_v12_2_06_7500_8500
* GIT version           : b6edc939da4fad996857af3da34191d070a147d4
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Samuel Yang
* Approved By           : Jacken Lee
* RELEASE DATE          : 2022/09/02   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Feature] Set default IPV6 IP address source to static.
    2. [Feature] Update sensor VBAT threshold.


*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS850NP010301
* Firmware REV	        : ZS850NP010301
* GIT repository        : ZS216-NP_v12_2_06_7500_8500
* GIT version           : 65729b11120b2085a51b1cfe78460988b2ea93ab
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Carter
* Approved By           : Ricky Lien
* RELEASE DATE          : 2022/03/24   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Issues] Fix the issue.
        redmine #4216 (Milan)BMC timestamp calibration not sync BIOS.


*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS850NP010201
* Firmware REV	        : ZS850NP010201
* GIT repository        : ZS216-NP_v12_2_06_7500_8500
* GIT version           : b79f8590b9c7091cb469f3f8c32b7ec54f1e4e99
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Carter
* Approved By           : Ricky Lien
* RELEASE DATE          : 2021/10/22   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Issues] Fix the issue.
        redmine #3960 Run DC Cycle BMC SEL Log appear Fan disappear event.


*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS850NP010101
* Firmware REV	        : ZS850NP010101
* GIT repository        : ZS216-NP_v12_2_06_7500_8500
* GIT version           : a03418b4e9c5d0af6a8a3770e10880a4b5224030
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Carter
* Approved By           : Ricky Lien
* RELEASE DATE          : 2021/10/01   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Issues] Fix below issues.
        (1) According to SDD team's suggestion to change the UC of VDDCR_SOC from 1.13V to 1.26V.
        (2) According to thermal team's suggestion to apply the new fan table and remove the restriction of the lowest PWM 60%.
        (3) Set Veto Bit from 0 to 1 to solve issue #3815.
    2. [Features] These two features are different between 5500/6500 and 7500/8500 projects.
        (1) Add four fans to meet the requirement of four two-rotor fans on the project.
        (2) The PSU is up to 1300W. We must modify the constant multiplier of PSU sensor to show the correct value.


*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS216NP010501
* Firmware REV	        : ZS216NP010501
* GIT repository        : ZS216-NP_v12_2_06
* GIT version           : 5715d70ff7fd109088f2910bd51c700072ab09df
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Carter
* Approved By           : Ricky Lien
* RELEASE DATE          : 2021/03/12   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Issues]  Fix below issues.
        (1)  According to SDD team's suggestion to change the UC of VBat from 3.2V to 3.3V.
        (2)  Does not show up SNMP item on the page of Backup Configuration with traditional or simplified Chinese.
        (3)  Make the function of clearing faults command workable.
        (4)  Remove PreMonitor and PostMonitor functions of PSU sensors to avoid their response time of status changing is too long.
        (5)  The function of config backup and restore is abnormal.
    2. [Features] Change PSU LED behavior to meet the requirement of Sophos' PRD V3.8.


*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS216NP010401
* Firmware REV	        : ZS216NP010401
* GIT repository        : ZS216-NP
* GIT version           : 9de63e8b296e44a20b6d24b47824848db15272ea
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Carter
* Approved By           : Ricky Lien
* RELEASE DATE          : 2020/10/28   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Issues]  Fix below issues created by QT team on redmine system.
        (1)  #2005
        (2)  #2001
        (3)  #1761
    2. [Issues]  Fix below issues created by SW3 team.
        (1)  #156 Transform the conf file from XML to INI format.
        (2)  #142 Cannot display the precise power consumption of the PSU.
        (3)  #140 Fanfail function is not working when removing the Fan3 or Fan4.
        (4)  #139 No matter how I restart the system, the restart cause always shows 0x05(RESTART_CAUSE_OEM).
        (5)  #111 The KVM function does not work through IE browser.
        (6)  #110 WEB session cannot time out.
    3. Upgraded AMIs codebase from RR12.2.0 to RR12.2.06.       


*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS216NP010301
* Firmware REV	        : ZS216NP010301
* GIT repository        : ZS216-NP
* GIT version           : 0ebbeaab6b2132d5d27b924b29e3ee66e8281f25
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Mace/Carter
* Approved By           : Ricky Lien
* RELEASE DATE          : 2020/06/03   (YYYY/MM/DD)
*****************************************************************
HISTORY:
    1. [Issues]  Fix below issues created by QT team on redmine system.
        (1)  #1629
        (2)  #1622
        (3)  #1621
        (4)  #1617
        (5)  #1317
        (6)  #1316


*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS216NP010201
* Firmware REV	        : ZS216NP010201
* GIT repository        : ZS216-NP
* GIT version           : c9180419f29098b955b1b1972eb014a27fccdac1
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Mace/Carter
* Approved By           : Ricky Lien
* RELEASE DATE          : 2020/04/23   (YYYY/MM/DD)
*****************************************************************
HISTORY:
	1. [Feature] Add OEM commands to set smart fan parameters.
    2. [Issues]  Fix below issues created by QT team on redmine system.
        (1)  #1373
        (2)  #1364
        (3)  #1363
        (4)  #1359
        (5)  #1358
        (6)  #1357
        (7)  #1356
        (8)  #1355
        (9)  #1354
        (10) #1349
        (11) #1345
        (12) #1342
        (13) #1340
        (14) #1338
        (15) #1327
        (16) #1326
        (17) #1323
        (18) #1321
        (19) #1317
        (20) #1316
        (21) #1315
        (22) #1314
        (23) #1312
        (24) #1311
        (25) #1310
        (26) #1309
        (27) #1308

        
*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : ELPIS MOTHERBOARD
* BMC Config REV        : ZS216NP010101
* Firmware REV	        : ZS216NP010101
* GIT repository        : ZS216-NP
* GIT version           : 4c043495764c5c15fbfdd924aaabb9b7fadee66e
* BMC CHIP              : AST2500
* Auxiliary REV         : 1
* IPMI VER              : IPMI 2.0
* Engineer              : Mace/Carter
* Approved By           : Ricky Lien
* RELEASE DATE          : 2020/02/27   (YYYY/MM/DD)
*****************************************************************
HISTORY:
	1. [Feature] Upgrade AMI codebase from RR11.8 to RR12.2.00.