*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : VIRGO MOTHERBOARD
* BMC Config REV        : NA
* Firmware REV	        : VIRGN020
* PMC REV               : VIRGM010
* SDK REV               : VIRGM005ARC_128366_170907.tar.gz
* BMC CHIP              : AST2500
* Auxiliary REV         : 4
* NIC CHANNEL 1         : RTL8201EL-VC DEDICATED NIC
* NIC CHANNEL 8         : INTEL X772 SHARED NIC
* IPMI VER              : IPMI 2.0
* Engineer              : Julia Yeh
* Approved By           : Jack Hsu
* RELEASE DATE          : 2018/5/24   (YYYY/MM/DD)
*****************************************************************
HISTORY:

  1. [Feature] Modify chassis intrusion function.
  2. [Feature] Modify voltage function for different motherboard ID.
  3. [Issue] The manufacture date time had abnormal character  \n  on FRU WEB page.
  	 [Fix] Modify manufacture date time parser function.
  4. [Issue] BMC update firmware fail via linux.
  	 [Fix] Modify switch SPI function.
  5. [Feature] Modify sel time initial value.	 
	6. [Issue] When memory temperature over the UNR cause the UUT shutdown then press power button boot abnormality..
  	 [Fix] Modify memory sensor default value.
  	 

NOTE:
	1. Please refer to Modification_sensor_VIRGO_20180212.doc to modify sensor.
	2. Must to use latest chassis intrusion cable.
	
*****************************************************************
*			BMC firmware release note
*****************************************************************
* Platform              : VIRGO MOTHERBOARD
* BMC Config REV        : NA
* Firmware REV	        : VIRGM010
* PMC REV               : VIRGM010
* SDK REV               : VIRGM005ARC_128366_170907.tar.gz
* BMC CHIP              : AST2500
* Auxiliary REV         : 2
* NIC CHANNEL 1         : RTL8201EL-VC DEDICATED NIC
* NIC CHANNEL 8         : INTEL X772 SHARED NIC
* IPMI VER              : IPMI 2.0
* Engineer              : Julia Yeh
* Approved By           : Jack Hsu
* RELEASE DATE          : 2018/2/12   (YYYY/MM/DD)
*****************************************************************
HISTORY:

  1. [Feature] Change code base v128366.
  2. [Issue] Voltage sensor sometimes get error value.
  	 [Fix] Modify compensating sensing mode in read ADC function.
  3. [Issue] Power control button can't work when BMC u-boot.
  	 [Fix] Modify u-boot to enable pass-through and set gpio pin.
  4. [Feature] Enable PWM in BMC u-boot.
  5. [Feature] Disable PECI function in BMC u-boot.
  6. [Issue] Display non-used error countered in WEB GUI.
		 [Fix] Disable to display the countered. 
	7. [Issue] PSU_Watt can't display over 400 Watts on WEB GUI.
		 [Fix] Modify PSU_Watt maximum value.
	8. [Issue] After BMC reset, VGA display can't normal when enable console redirection.
		 [Fix] Modify initial COM port.
	9. [Issue] BMC sometimes send error CPU event.
		 [Fix] Modify read ME function.
 10. [Feature] Modify SDR table.
 11. [Issue] BMC sometimes send thermal trip event when DC cycle.
 		 [Fix] Modify thermal trip detect function.
 12. [Feature] Modify NCSI driver for 10G AEN interrupt.
 13. [Feature] Add multiplatform function.
 14. [Issue] BMC sometimes can't read CPU temperature when power on.
 		 [Fix] Modify detect BIOS completed flag.
 15. [Feature] Modify P1V8_PCH LC threshold value(1.76V).
 16. [Feature] Modify SDR table(refer VIRGO_SDR_List_2018_0212.xls).
 17. [Feature] Add OEM command to modification sensor.
 18. [Feature] Update socflash tool v1.15.
 19. [Feature] Modify FAN fail Redundant function when modify FAN sensor.
 20. [Feature] Add firmware,config and platform name on WEB GUI.

NOTE:
	1. Please refer to Modification_sensor_VIRGO_20180212.doc to modify sensor.