1U 12G 10 x 2.5" Barebone Storage Chassis with AIC PAVO Motherboard

PCICASE Model No: FB122-PV
Manufacturer Model No: FB122-PV
Build To Order
Key Features

• 1U 10-Bay storage server supports 10 PCIe SSD 2.5” FF drives (NVMe) to provide a highly dense, all NVMe Flash storage array
• Supports two Intel® Xeon® Scalable Processors
• With Intel® Lewisburg C620 series Chipset to provide 5+ years product life cycle
• Flexible IO usage with Max I/O® to support up to 2 COTS PCIe 3.0 cards
• Onboard Baseboard Management Controller for system management and IPMI control
• Front-to-back airflow and easy swap fans to provide optimal thermal conditions
• Two 10GbE SFP+ ports
• Customizable to meet your requirements

Features & Benefits

FB122-PV, a 1U 10-Bay SFF Storage Server Solution, supports dual Intel® Xeon® Scalable Processors. FB122-PV has 10 x 2.5” PCIe SSD hard drive bays to provide a highly dense, all NVMe Flash storage array.Harnesses MAX I/O™ technology, FB122-PV maximizing the usage of off-the-shelf expansion cards in the barebone.

Dimensions (W x D x H) (with chassis ears)
• mm: 438 x 845 x 44.4
• inches: 17.2 x 33.2 x 1.75

Motherboard
AIC Server Board Pavo

Processor
• Processor Support: Two Intel® Xeon® Scalable Processors (Skylake and next gen. CPU)
•Supports CPU TDP up to 140W
• QPI Speeds: 9.6 GT/s, 10.4 GT/s
• Socket Type: Socket P0 (LGA-3647 Socket)

Chipset Support
Intel® Lewisburg C620 series PCH

System Memory
• 6 x memory channels per CPU, 2 channels with 2DPC + 4 channels with 1DPC
• 16 x DIMM slots support:
DDR4 2400/2666MHz RDIMM/LRDIMM (feature supports up to DDR4 2933MHz by next gen. process upgrade)
- up to 256GB RDIMM SRx4
- up to 512GB RDIMM DRx4
- up to 2048GB RDIMM 3DS 8Rx4
- up to 1024GB LRDIMM QRx4
- up to 2048GB LRDIMM 3DS 8Rx4
• Intel® Optane™ DC Persistent Memory (Apache Pass) support

Front Panel
System power on/off, System ID, System reset, USB 2.0 Type A

LED's
Power status, System alert, System ID

Drive Bays
• External : 10 (U.2 NVMe) x 2.5” hot swap
• External : 2 (7mm, rear) x 2.5” hot swap

Backplanes
5 x 2-port PCIe BP with dual SFF-8643 connectors on each

Expansion Slots (PCIe 3.0)
• 1 x16 slot (FHHL)
• 1 x OCP mezzanine card V2.0


System BIOS
BIOS Type: Insyde UEFI BIOS
BIOS Features :
• ACP
• PXE
• WOL
• AC loss recovery
• SMBIOS
• Serial console redirection
• Serial console redirection
• BIOS Boot Specification
• BIOS Recovery Mode
• SRIOV
• iSCSI
• TPM
• PICe Hotplug

Riser Card (included)
RC-PE1U16-TY : (1 x16 PCIe slot) +10 x OCULINK

On-board Devices

SATA:
• Intel® Lewisburg PCH on-chip solution
• 4 x SATA 6.0 Gb/s (by 1 x mini-SAS HD) +2 x SATA 6.0 Gb/s (by 2 x SATA 7 pin) + 5 x SATA 6.0 Gb/s (by Max I/O®)

BMC:
Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
• Baseboard Management Controller
• Intelligent Platform Interface 2.0 (IPMI 2.0)
• iKVM, Media Redirection, IPMI over LAN, Serial over LAN
• SMASH Support
• HTML5
• Redfish

Network Controllers:
• Intel® PCH (Lewisburg) Integrated 10GbE LAN Controller with dual SFP+ rear connectors
• Intel® I350 dual ports GbE RJ45 rear connectors
• Realtek RTL8211E for BMC dedicated management port

Graphics :
Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
• PCIe VGA/2D Controller
• 1920x1200@60Hz 32bpp

Rear I/O

LAN:
• 2 x 10GbE SFP+
• 2 x GbE RJ45
• 1 x GbE RJ45 dedicated to BMC management

USB:
2 x USB 3.0 Type A
VGA:
1 x external DB-15 VGA port

Serial Port:
1 x audio jack for COM port


Power Supply
750W 1+1 redundant power supply 80+ Platinum
• AC INPUT: 100~240V or 115~204V,50/60Hz,8.8A-4.3A

System Cooling
6 x 40 x 56mm 21500/18000 rpm hot swap fan modules

System Management
• IPMI 2.0
• KVM over IP
• Media redirection
• Temperature, fan, voltage, PSU sensor monitor
• System temperature
• System ID / System fail indicator
• Remote Power on/off/reset
• SEL message alarm through mail
• SNMP support
• Intel NM
• HTML5
• Redfish

Environmental Specifications
• Operating Temperature: 0° - 35°C
• System relative humidity : 5% - 95% non-condensing

Gross Weight (w/PSU & Rail)
• kgs: 24
• lbs: 53

Packaging Dimensions (W x D x H)
• mm: 590 x 1130 x 273
• inches: 23.2 x 44.5 x 10.7

Mounting
Standard: 28" tool-less slide rail
* All specifications are subject to change without notice.

Datasheet FB122-PV Datasheet
 

 FB122-PV Datasheet.pdf

 

Product Images FB122-PV(Front 45 Degrees)
 

 FB122-PV_Front45.jpg

 

Product Images                                          FB122-PV (Front)
 

 FB122-PV_Front.jpg

 

Product Images     FB122-PV (Top)
 

 FB122-PV_Topopen.jpg

 

Product Images FB122-PV (Rear)
 

 FB122-PV_Rear.jpg

 

Get in touch

Give us a call to find out more about our products

Inside the UK
0870 300 3388

Outside the UK
+44 1908 272770

Or send us an email
pcisales@pcicase.co.uk